Ktc KPC-HDB230M Manuel d'utilisateur télécharger pdf (Page 2)

Image Device 2.1 Mega Pixel, 1/3” Exmor SONY CMOS

Video output mode

HD-SDI: 1080p@30, 1080p@25, 720p@60, 720p@50

TV Out: NTSC / PAL selectable

Effective Pixels 1984 (H) x 1105 (V)

Unit cell size 2.8um (H) x 2.8um (V)

S/N Ratio More than 50dB

Minimum Illumination 0.1 Lux

Video Output HD-SDI / 1.0 Vp-p Composite ( 75Ω ).

Lens Board Lens, Pinhole Lens

Shutter speed Auto / Manual selectable

D-WDR / BLC OFF / BLC / D-WDR

3DNR OFF / LOW / MIDDLE / HIGH

Controllable Max Gain 23 dB

White Balance AUTO / AUTOext / PUSH / MANUAL

Digital Zoom Ratio 1X ~ 20X

Digital Slow Shutter OFF, X2 ~ X8

Privacy Masking Zone 16 ea , On / Off

Day & Night Digital Day & Night

OSD Remote Control

Operating Temperature 14°F~112°F (-10°C~+50°C)

Storage Temperature -4°F~158°F (-20°C~+70°C)

Power Consumption DC12V (±10%), Max. 110 mA

Dimensions (mm) 23.0(Ø) x 77.5(WaterProof Cap Housing only)

Weight Approx. 90g

IP Rating IP67 (WaterProof Cap Housing only)

Specications and designs are subject to change for improving the functionality of this product without notice.

OSD MANUAL

SPECIFICATION

MAIN MENU 1st Sub MENU 2nd Sub MENU 3rd Sub MENU 4th Sub MENU

EXPOSURE

BRIGHTNESS 0 ~ 20

AE MODE NORMAL / DEBLUR

SHUTTER

AUTO /

MANUAL /

FLICKER

LEVEL

1/30(25),1/60(50),

1/120(100),1/240,1/500,

1/1K,1/4K,1/8K,1/16K,

1/30K,1/60K

RETURN BACK / EXIT

DSS Off / X2 / X3 / X4 / X5 / X6 / X7 / X8

AGC 0 ~ 20

RESET DATA BACK / DEF

RETURN BACK / EXIT

WHITE

BALANCE

WB MODE

AUTO / AUTOext

/ PUSH / MANUAL

COLOR TEMP

LOW / MIDDLE / HIGH

R-GAIN

B-GAIN

0 ~ 20

RETURN

BACK / EXIT

SATURATION

0 ~ 20

RESET DATA BACK / DEF

RETURN BACK / EXIT

D-WDR /

BLC

OFF / BLC /

D-WDR

H-POS

0 ~ 20

V-POS

0 ~ 20

H-SIZE

0 ~ 20

V-SIZE

0 ~ 20

RETURN BACK / EXIT

DNR OFF / LOW / MIDDLE / HIGH

DAY &

NIGHT

AUTO/ COLOR /

B&W

AGC THRES

0 ~ 20

AGC MARGIN

0 ~ 20

DELAY

LOW / MIDDLE / HIGH

RESET DATA

BACK / DEF

RETURN BACK / EXIT

IMAGE

SHARPNESS 0 ~ 20

GAMMA 0.45 / 0.5 / 0.55 / 0.6 / 0.65

MIRROR OFF / ON

FLIP OFF / ON

DZOOM 1.0X / 1.1X / 1.2X / 1.3X …… 7.7X / 7.8X / 7.9X / 8.0X

DEFOG OFF / ON

MODE AUTO / MANUAL

LEVEL LOW / MIDDLE / HIGH

RETURN BACK / EXIT

LENS SHADING OFF / ON

WEIGHT 0% ~ 100%

RETURN BACK / EXIT

RESET DATA BACK / DEF

RETURN BACK / EXIT

SPECIAL

FOCUS ASSIST OFF / ON

PRIVACY OFF / ON

ZONE NUM 0 ~ 15

ZONE OP OFF / ON

H-POS 0 ~ 60

V-POS 0 ~ 40

H-SIZE 0 ~ 40

V-SIZE 0 ~ 40

Y LEVEL 0 ~ 10

CR LEVEL 0 ~ 10

CB LEVEL 0 ~ 10

RETURN BACK / EXIT

HLMASK OFF / ON

LEVEL 0 ~ 20

COLOR

BLK / WHI / YEL / CYN /

GRN / MAG / RED / BLU

RETURN BACK / EXIT

PATTERN OFF / ON

RESET DATA BACK / DEF

RETURN BACK / EXIT

SYSTEM

SDI FORMAT 1080P / 720P

FRAME RATE 30(60) / 25(50)

CVBS FORMAT NTSC / PAL

APPLY OK / ON

LANGUAGE ENG / CHN / CHN(S)

SYSTEM INFO

S/W VERSION

SET VERSION

RETURN BACK / EXIT

REBOOT

RETURN BACK / EXIT

• Function Description

0. SETUP

- EXPOSURE: Go sub menu for camera exposure control.

- WHITE BALANCE: Go sub menu for camera white balance control.

- WDR/BLC: Go sub menu for camera WDR or BLC action.

- DNR: Control noise reduction setting.

- DAY & NIGHT: Go sub menu for camera day & night control.

- IMAGE: Go sub menu for adjust image functions.

- SPECIAL: Go sub menu for special feature control.

- SYSTEM: Go sub menu for system control & information.

- Reset Data All: Reset camera’s all feature data to default value.

1. EXPOSURE

- BRIGHTNESS: Adjust image brightness value.

- AE MODE: Adjust AE control Mode.

- SHUTTER: Select shutter speed control type.

LEVEL: Adjust shutter speed at manual shutter mode.

- DSS: Adjust digital slow shutter control level.

- AGC: Adjust max gain level for brightness control.

2. WHITE BALANCE

- WB MODE: Select white balance control mode.

AUTO: Full auto control mode in color temperature rage 2300K~10000K

AUTOext: Extened auto mode for special illumination.

PUSH: Enable fix the control setting for specific environment.

Push & release, for fix WB control setting

MANUAL: Enable WB control setting by user’s intention.

>COLOR TEMP: Select color temperature range for WB control at

manual mode

>R-GAIN: Adjust red color gain for WB control at maual mode.

>B-GAIN: Adjust blue color gain for WB control at manual mode.

- SATURATION: Adjust image brightness value.

3. WDR/BLC

- MODE: Select WDR for BLC mode.

BLC: Act in Backlight compensation mode.

D-WDR: Digital wide dynamic range control.

- BLC H-POS: Select BLC control zone vertical position.

- BLC V-POS: Select BLC control zone horizontal position.

- BLC H-SIZE: Select BLC control zone vertical size.

- BLC V-SIZE: Select BLC control zone horizontal size.

4. DNR: Reduce image’s noise

5. DAY & NIGHT

- MODE: Select DN( Digital Day & Night control ) mode.

AUTO: Camera controlled automatically to decide day or night

environment using AGC calculation data.

COLOR: Fix to mode at day environment setting.

Make video image act in color.

B&W: Fix to mode at night environment setting.

Make video image act in B/W.

> AGC THRES: Threshold level for Change Day to Night or Night to

Day mode.

> AGC MARGIN: Hysteresis Level for Change Day to Night or Night to

Day mode.

> DELAY: Delay Time for change day or Night Mode at Auto mode.

6. IMAGE

- SHARPNESS: Adjust image sharpness level.

- GAMMA: Gamma Curve Select.

- MIRROR: Vertical Mirror Setting.

- FLIP: Horizontal flip setting.

- DZOOM: Select digital zoom magnification.

- DEFOG: Enable Defog compensation.

LEVEL: Defog compensation Level change at Auto / Manual mode.

-LENS SHADING: Enable lens shading compensation.

7. SPECIAL

- FOCUS ASSIST: Enable Lens Focus Assist OSD. ( 1080P Mode Only ).

- PRIVACY: Setting for protect private area in image using mask setting.

ZONE NUM. : Select private mask zone number. V-SIZE : Select zone vertical size.

ZONE DISP. : Select zone mask display on/off. Y LEVEL : Select mask color ( Y Level ).

H-POS : Select zone horizontal position. CR LEVEL : Select mask color ( CR Level ).

V-POS : Select zone vertical position. CB LEVEL : Select mask color ( CB Level ).

H-SIZE : Select zone horizontal size.

- HLMASK: Mask image high light area.

LEVEL : Select high light level.

COLOR : Select mask color

- PATTERN: Color bar display Enable.

8. SYSTEM

- SDI FORMAT: 1080P / 720P

- SDI FPS: 30 or 25 fps in 1080p mode,

720P Mode: 60 / 50 fps.

- CVBS FORMAT: NTSC / PAL

- APPLY: Apply all video setting changed at once. Use the Set button to apply.

- SYSTEM INFO

S/W VERSION: Camera’s basic software version.

SET VERSION: Camera’s feature control setting version.

1 2

Commentaires sur ces manuels

Pas de commentaire

Ktc KPC-HDB230M Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Caméscopes Ktc KPC-HDB230M